Table of Contents
Advertisement
7-46 Network Report Definition
P0724352 Standard 1.0
This compares the value of the Ans Category 1 field with the value of the
Ans Category 2 field. The result of this calculation would be whichever
value is the largest. The largest value is compared with the value of Ans
Category 3 to determine which is largest. The result would be compared to
Ans Category 4, and so on. The final result of this formula would be the
largest Ans Category field value.
PF2=Constant
Displays a pop-up window asking that a constant be entered. This may be
any number. One of the most frequent uses for this command is calculating
a percentage, where the constant '100' must be entered.
This command only appears after [Change field] is used and before [Edit
done] is selected.
PF3=Change field
Edits the Calculation field.
PF3=Edit Done
Indicates that no more entries are required in the Calculation field. This
command appears after [Change field] is selected.
Insert Here=Insert
Inserts a variable, constant, or operator between the entry above the
selection bar and the entry in the selection bar. When this command is
selected, the selection bar in the Calculation field slowly blinks between
dim and bright. The [Insert=Overwrite] command appears when this
command is activated.
November 1994
Ans Category 5
MAX
Ans Category 6
MAX
Ans Category 7
MAX
Ans Category 8
MAX
Ans Category 9
MAX
Ans Category 10
MAX
Advertisement
Table of Contents
