Change Network Day Routing Tables - Northern Telecom NAC User Manual

Change Network Day Routing Tables

The Change Network Day Routing Tables feature allows changes to be
made to the day target table for each NACD queue. This table is used to
route incoming calls during normal working hours.
This feature specifies the source NACD-DN, up to 20 target NACD-DNs,
and the number of seconds the call should wait in the queue before it sends
a call request to the next target NACD-DN. All the Target and Time fields
must be completed in a column before entries can be made in the next
column.
Note: When defining day routes, do not select CDNs as either source
or destination DNs for the purpose of rerouting calls. The Meridian
MAX does not include any CDNs in the lists sent to the NAC for use
in configuration control operations.
Figure 12-2
Network Configuration Control—Day Tables
Network Configuration Control – Day Tables
NACD-DN ––Target–– Time ––Target–– Time ––Target–– Time
255– 500 4169257719 60 4169257719 240
4169257720 60
4169257721 60
4169257722 60
4169257723 60
4169257724 60
4169257725 60
255– 501 Empty
HELP=Help PF1=Commands PF2=Options F10=Display Execution Queue
Network Administration Center Supervisor's User Guide Product release 2
Network Configuration Control 12-5
12:00:00
F20=>>