Table of Contents
Advertisement
Menu options
Exit
Returns the system to the main menu.
Change Network Day Routing Tables
Adds, changes, or deletes entries to the day target table for each NACD
queue. This table routes incoming calls during normal working hours.
Change Network Night Routing Tables
Adds, changes, or deletes entries to the night target table for each
NACD queue. This table routes calls when the queue is in night
service.
View Miscellaneous Parameters
Displays the network link status and Meridian 1 configuration control
link status for each of the defined nodes.
Run Network Configuration Update
Polls all the nodes on the network and updates the information on the
NAC. This feature can be used to confirm that a change has been
made. It is also useful if the configuration of a Meridian MAX node
becomes out of sync with its entry in the NAC displays. This
temporarily slows the NAC and Meridian MAX nodes. It is
recommended that this command be used sparingly.
For example, imagine that the day tables have been changed on a
Meridian MAX node in Chicago. This change is reflected immediately
on the routing table display for Chicago. The change request is also
sent to the Meridian MAX in Chicago. However, before the change is
executed, Chicago experiences a power failure, and the change order is
never applied. When the Meridian MAX is reactivated, its
configuration is as it was before; however, as far as the NAC is
concerned the change to the day tables has already been made. The
NAC displays can be put back in sync with the Chicago Meridian
MAX configuration by running a network configuration update.
The following system message is displayed in the bottom left-hand
corner of the Network Configuration Control submenu after this
command is selected:
Network Administration Center Supervisor's User Guide Product release 2
Configuration update has been initiated
Network Configuration Control 12-3
Advertisement
Table of Contents
