Table of Contents
Advertisement
2-18 The NAC workstation
General function keys
Table 2-1
Generic function keys
Function key
HELP=Help
HELP=Exit help
PF1=Commands
P0724352 Standard 1.0
Each feature in the NAC displays a list of function keys. The list changes as
each function key is used.
For example, while displaying the Profile Maintenance feature, note that
the function key list includes the entry: PF1=Commands. Press {PF1} and
the Profile Maintenance command pop-up window appears. The description
for the {PF1} function key also changes to PF1=Select no command. Press
{PF1} again. The command pop-up window disappears and the Profile
Maintenance screen reappears.
Table 2-1 describes the function keys used by most features. Exceptions
and additions to this table may be found in the appropriate sub-section for
each feature.
Note: The keys to obtain a specific function differ depending on the
type of keyboard being used. All of the NAC documents assume that
DEC VT420-type keyboard is being used. However, the NAC displays
the correct key beside the function name for the workstation's
keyboard.
Explanation
The {HELP} key is listed whenever a help message is available. Press
{HELP} to display the help message.
This version of the {HELP} key is listed whenever a help message is
displayed. Press {HELP} to remove the help message.
The {PF1} key is listed by every feature. Press {PF1} to display the
[Commands] pop-up window. The [Commands] pop-up window lists the
commands available for the feature. Each feature has a different set of
commands listed on the [Commands] pop-up window. The commands
are described in detail in the sub-section for each feature.
November 1994
— continued —
Advertisement
Table of Contents
