Table of Contents
Advertisement
Procedure 2-1 (continued)
Workstation configuration
Step
Installer's action and system's response
6
Enter the number that corresponds to your keyboard type, followed by {RETURN}.
Note: The >>> sign that appears before a selection indicates it is the default
selection. To choose this selection, you can either enter the number
associated with it, followed by {RETURN}, or just press {RETURN}.
Go to Step 16.
7
If your workstation is a PC running Reflection 4+, the system continues with the
following prompt.
Select your keyboard type from the following list:
1. AT style keyboard (10 function keys on left)
>>> 2. Enhanced keyboard (12 function keys along top)
Selection ––>
If your keyboard is an AT-style keyboard, enter 1, followed by {RETURN}.
If your keyboard is an enhanced keyboard, enter 2, followed by {RETURN}.
Samples of these keyboards are shown later in this chapter.
8
The system then asks you to choose a color scheme.
Select the desired color scheme from the following list:
>>> 1. Color –– black background
2. Color –– blue background
Selection ––>
9
Enter 1, followed by {RETURN}, if you want a black background screen.
Enter 2, followed by {RETURN}, if you want a blue background screen.
The following prompt then appears.
About to start transfer of an appropriate Reflection
4–PLUS configuration file from NAC to your PC...
The transfer should take approximately 15 – 30 seconds.
Please press <ENTER> to begin...
Network Administration Center Supervisor's User Guide Product release 2
—
—
continued
The NAC workstation 2-5
Advertisement
Table of Contents
