Table of Contents
Advertisement
NAC time change procedure
There are cases where the NAC system time must be changed, such as
daylight savings time or the time being set incorrectly.
If you want to change the time on the NAC, follow these steps:
1
Display the NAC Maintenance and Administration main menu (system
running mode).
This menu is described in the NAC 2 System Administration and
Maintenance Guide (NTP 553-4001-510), "Maintenance and
administration programs: system running" chapter.
2
Press s to select the Shutdown the System option.
A prompt appears to confirm that the system is to be shut down.
3
Press y to confirm that the system is to be shut down.
The NAC Maintenance and Administration main menu (system
shutdown mode) appears. This menu is described in the NAC 2 System
Administration and Maintenance Guide (NTP 553-4001-510),
"Maintenance and administration programs: system shutdown" chapter.
Press r to select the Restart & Power Down Utilities option.
4
The Restart and Power Down Utilities submenu appears.
Press r to select the Restart the NAC System option.
5
A prompt appears to confirm that the system is to be restarted.
6
Press y to confirm that the system is to be restarted.
A series of system messages are displayed. This takes a few minutes.
The system stops at a prompt which asks if the time and date are to be
changed. The current date and time appears above this prompt.
7
Enter y at the prompt to indicate that the time and date are to be
changed.
Another prompt appears to enter the new time and date.
Network Administration Center (NAC) Installation Guide Product release 2
14-1
Advertisement
Table of Contents
