Table of Contents
Advertisement
16-10 Schedule Definition
P0724352 Standard 1.0
Follow this procedure to attach multiple reports to the schedule:
1
Press [Commands] on the main Schedule Definition screen or the
Schedule Definition–Attached Change Order screen.
The Commands pop-up window appears.
2
Select the " Attach reports to this schedule" option.
The Schedule Definition-Attached Reports screen appears as shown in
Figure 16-2. All of the reports currently attached to this schedule, if any,
appear on the screen.
3
Position the cursor in the Scheduled Reports column and press [Add
multiple reports].
A list of defined reports is displayed in a pop-up window.
4
One at a time, select each report to appear in the schedule.
Each report appears in the schedule after it is selected. Continue this
step until all the required reports are selected.
5
Press [Stop adding] to indicate that no more reports are to be added,
at this time.
The pop-up window disappears.
6
Move the cursor to the Copies field, if required, and adjust the number
of copies to be printed of each report.
The system automatically indicates one copy but up to nine can be
made of each report.
7
To remove an existing report, position the cursor on the report and
press [Remove report].
8
Press [Commands] to display the Commands pop-up window.
9
Follow one of two options:
a) Select "Attach change orders to this schedule" from the Commands
pop-up window if change orders are to be added at this time.
This procedure is described in the "Attaching change orders to the
schedule" section described in this chapter.
or
b) Select " Return to main schedule screen " from the Commands pop-up
window if no further reports or change orders are to be attached to the
schedule
The system returns to the main Schedule Definition screen.
10 Press [Commands] on the main Schedule Definition screen.
11 Select the " Save as a new schedule definition " option.
November 1994
Advertisement
Table of Contents
