Configure Sim Pin; Configure System Settings - Digi IX14 User Manual

Hide thumbs Also See for IX14:

Table of Contents

Initial configuration

Configure SIM PIN

If your cellular provider requires a SIM pin, configure the PIN for a SIM:

1. Click Configuration > Modem.

2. Enter the PIN in the PIN field.

3. Click Apply to save the configuration and apply the change.

Command line

1. Log into the IX14 command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

2. At the command line, type config to enter configuration mode:

3. At the config prompt, set the SIM PIN:

(config)> modem modem pin pin

4. Save the configuration and apply the change:

(config)> save

Configuration saved.

5. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

To configure system settings:

IX14 User Guide

Configure SIM PIN