Serial port
Access Digi Remote Manager from the Digi Navigator
You can access Digi Remote Manager from the Digi Navigator. Within the Remote Manager, you can
configure and monitor your Digi devices.
For information about using Digi Remote Manager, refer to the
1. Make sure Digi Navigator is installed.
2. Launch the Digi Navigator.
3. Click the Digi Remote Manager link in the toolbar.
4. The Digi Remote Manager login screen launches.
a. Enter your Remote Manager user name and password.
b. Click Login.
Advanced RealPort configuration without using the Digi
Navigator
You can configure the IX20 to communicate with your computer using RealPort.
Windows Operating System
This method can be used if your computer has a Windows OS installed and you choose not to use the
Digi Navigator
to discover devices and configure RealPort.
To complete the RealPort configuration process for Windows:
Step 1:
Download the RealPort driver
Step 2:
Configure RealPort on your laptop
Step 3:
Configure the serial port for RealPort mode
Step 4:
Configure the RealPort service
Linux Operating System
To complete the RealPort configuration process for Linux OS:
Step 1:
Download the RealPort driver
Step 2: To complete the RealPort configuration process, refer to the
LINUXsection in the RealPort Installation User's Guide.
Download the RealPort driver
The first step is to download the RealPort application and save it to a location that you can easily
access.
IX20 User Guide
Advanced RealPort configuration without using the Digi Navigator
Digi Remote Manager User
Get started: Install RealPort for
Guide.
299