Save Configuration To A File - Digi Connect IT 4 User Manual

Hide thumbs Also See for Connect IT 4:

Table of Contents

System administration

2. At the command line, type config to enter configuration mode:

3. Make any necessary configuration changes.

4. Save the configuration and apply the change:

(config)> save

Configuration saved.

5. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Save configuration to a file

You can save your Connect IT 4 device's configuration to a file and use this file to restore the

configuration, either to the same device or to similar devices.

This procedure creates a binary archive file containing the device's configuration, certificates and

keys, and other information.

1. Log into the Connect IT 4 WebUI as a user with Admin access.

2. On the main menu, click System. Under Configuration, click Configuration Maintenance.

The Configuration Maintenance windows is displayed.

3. In the Configuration backup section:

a. (Optional) To encrypt the configuration using a passphrase, for Passphrase

(save/restore), enter the passphrase.

b. Click SAVE.

Digi Connect IT® 4 User Guide

Configuration files