Save Configuration To A File - Digi IX40 User Manual

System administration
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Make any necessary configuration changes.
4. Save the configuration and apply the change
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Save configuration to a file

You can save your IX40 device's configuration to a file and use this file to restore the configuration,
either to the same device or to similar devices.
É
Web
This procedure creates a binary archive file containing the device's configuration, certificates and
keys, and other information.
Log into the IX40 WebUI as a user with full Admin access rights.
1. On the main menu, click System. Under Configuration, click Configuration Maintenance.
The Configuration Maintenance windows is displayed.
2. In the Configuration backup section:
a. (Optional) To encrypt the configuration using a passphrase, for Passphrase
(save/restore), enter the passphrase.
b. Click SAVE.
IX40 User Guide
Configuration files
875