Save Configuration To A File - Digi IX30 User Manual

System administration

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX30
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Make any necessary configuration changes.
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Save configuration to a file

You can save your IX30 device's configuration to a file and use this file to restore the configuration,
either to the same device or to similar devices.

Web
This procedure creates a binary archive file containing the device's configuration, certificates and
keys, and other information.
1. Log into the IX30 WebUI as a user with Admin access.
2. On the main menu, click System. Under Configuration, click Configuration Maintenance.
The Configuration Maintenance windows is displayed.
IX30 User Guide
Configuration files
869