Show Openvpn Server Status And Statistics - Digi Connect IT 4 User Manual

Hide thumbs Also See for Connect IT 4:

Table of Contents

Virtual Private Networks (VPN)

where value is any number of weeks, days, hours, minutes, or seconds, and takes the

format number{w|d|h|m|s}.

For example, to set delayed_start to ten minutes, enter either 10m or 600s:

(config)> vpn openvpn client openvpn_client1 surelink advanced delayed_

The default is 300s.

g. Set the time to add to the test interval when restarting the list of actions. This option is

capped at 15 minutes.

(config)> vpn openvpn client openvpn_client1 surelink advanced backoff_

interval value

where value is any number of weeks, days, hours, minutes, or seconds, and takes the

format number{w|d|h|m|s}.

For example, to set backoff_interval to ten minutes, enter either 10m or 600s:

(config)> vpn openvpn client openvpn_client1 surelink advanced backoff_

interval 600s

The default is 300 seconds.

h. The interface_gateway parameter is used by the Interface gateway Ping test as the

endpoint for traceroute to use to determine the interface gateway. The default is 8.8.8.8,

and should only be changed if this IP address is not accessible due to networking issues. To

set to an alternate host:

(config)> vpn openvpn client openvpn_client1 surelink advanced

interface_gateway hostname/IP_address

8. Save the configuration and apply the change:

(config vpn openvpn client openvpn_client1 connection_monitor target 0)>

Configuration saved.

9. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Show SureLink status and statistics

Show OpenVPN server status and statistics

You can view status and statistics for OpenVPN servers from either the web interface or the

command line:

Digi Connect IT® 4 User Guide

for information about showing Surelink status for OpenVPN