Create A New Hotspot - Digi Connect EZ 4 User Manual

Hotspot

Create a new hotspot

Required configuration items
A device or bridge for the hotstpot.
n
If a bridge is used, it must be included in an interface with an assigned IP address.
l
The authentication mode:
n
If Local shared password is selected for the authentication mode, include the password.
l
If RADIUS shared password or RADIUS users is selected for the authentication mode,
l
include RADIUS configuration information.
If HotspotSystem is selected for the authentication mode, include HotspotSystem
l
configuration information.
See Hotspot authentication modes
The login page source, either Local or Remote.
n
If Remote is selected, include the IP address of fully-qualified domain name of the remote
l
web server that serves the login page.
An IP address and subnet for the hotspot.
n
Additional configuration items
If the login page source is Local, include the name of the local HTML file, if different than the
n
default.
If the login page source is Remote, include the shared secret that the remote server and the
n
hotspot. Used with cloud-based hotspot providers.
The Authentication port used by the hotspot.
n
The Server port used by the hotspot.
n
Hotspot DHCP server settings:
n
Lease time.
l
Lease range start and end.
l
Walled garden configuration:
n
Domains that clients connected to the hotspot can access prior to the client being
l
authenticated.
Subnets that clients connected to the hotspot can access prior to the client being
l
authenticated.
Maximum download speed, in Kbps.
n
Maximum upload speed, in Kbps.
n
Enable verbose logging.
n
To create a new hotspot:

WebUI
Digi Connect EZ 4/4i User Guide
for more information about authentication modes.
Hotspot configuration
278