Connecting Network Cabling And Attaching The Wire Relief Bracket; Attaching A Network Cable (Utp Cable To Rj45 Port Shown) - Enterasys D2G124-12 Hardware Installation Manual

Connecting Network Cabling and Attaching the Wire Relief Bracket

The wire relief bracket is designed to hold network cables securely in place and prevent tampering
once cabling is connected to switch ports. To attach the wire relief bracket to the lockbox tray:
1. Attach network cables as shown in Figure
page 2‐28 for more information.
Figure 2-19

Attaching a Network Cable (UTP cable to RJ45 port shown)

2. Align the wire relief bracket with the flange and the two screw holes on the side of the lockbox
tray as shown in Figure
2‐19. Refer to "Connecting to the Network" on
2‐20 on page 2‐22.
Enterasys D-Series Hardware Installation Guide 2-21
Mounting the Switch