Configuring Radius; Purpose; Commands; Show Radius - Enterasys D2 D2G124-12P Cli Reference Manual

D-series ethernet switches
Table of Contents

Advertisement

To specify a management level (management access authentication):
Enterasys:version=1:mgmt=level
where level indicates the management level, either ro, rw, or su.
To specify both management level and policy profile:
Enterasys:version=1:mgmt=level:policy=string
The undecorated format is simply a string that specifies a policy profile name. The undecorated 
format cannot be used for management access authentication.
Decorated Filter‐IDs are processed first by the switch. If no decorated Filter‐IDs are found, then 
undecorated Filter‐IDs are processed. If multiple Filter‐IDs are found that contain conflicting 
values, a Syslog message is generated.

Configuring RADIUS

Purpose

To perform the following:
Review the RADIUS client/server configuration on the switch.
Enable or disable the RADIUS client.
Set local and remote login options.
Set primary and secondary server parameters, including IP address, timeout period, 
authentication realm, and number of user login attempts allowed.
Reset RADIUS server settings to default values.
Configure a RADIUS accounting server.

Commands

For information about...

show radius

set radius
clear radius
show radius accounting
set radius accounting
clear radius accounting
show radius
Use this command to display the current RADIUS client/server configuration.
Syntax
show radius [status | retries | timeout | server [index | all]]
Configuring RADIUS
Refer to page...
15-3
15-5
15-6
15-7
15-8
15-9
D-Series CLI Reference 15-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Enterasys d2 d2g124-12D2g124-12D2g124-12p

Table of Contents