Table of Contents
Advertisement
until you enter the
configuration into the startup configuration file within Flash.
Map-Class Configuration
The Map Class configures a common profile (characteristics) that can be applied to PVCs, eliminating
the need to configure parameters on all individual PVCs. The
configures a FR map class.
Show Running Configuration
show running-configuration
The
Note: Only those parameters different than default values are displayed.
Displaying Statistics
The following
•
show frame-relay lmi
•
show frame-relay map
Inverse ARP.
•
show frame-relay traffic
•
show frame-relay pvc
•
show fragment
show map-class
•
interfaces which are registered with them.
Reports and Alarms
The FR-related alarms are described in Appendix A:
Standard ASCII Table"
Clear Statistics
When it becomes necessary, you can strip the Inverse ARP Table and other tables of FR statistics
with the
clear frame-relay inarp
frame-relay inarp
relay counter
copy running config startup config
show
commands display Frame Relay statistics:
— displays global or interface LMI counters.
— displays DLCIs and remote nodes' IP addresses discovered by
— displays Inverse ARP traffic statistics.
— displays global or per interface, sub-interface or DLCI data.
— displays fragmentation information in a summary or detailed format.
— displays class information for all configured map-classes as well as the
on page A-1.
command deletes particular or global FR port data and the
command deletes specific or global DLCI or FR port data.
command displays the running configuration on the screen.
"Alarms/Events, System Limits, and
and
clear frame-relay counter
FRF.12 Fragmentation
command to copy the running
map-class frame-relay
commands. The
clear frame-
XSR User's Guide 9-9
command
clear
Advertisement
Table of Contents
Troubleshooting
