Show Snmp Engineid; Show Snmp Group - Enterasys X-Pedition XSR CLI Cli Reference Manual

The example below shows output with the location option entered:
XSR#show snmp location
Haverhill Mass.

show snmp engineID

This command displays the identification of the local SNMP engine.
Syntax
show snmp engineID
Mode
Privileged EXEC: XSR#
Sample Output
The following is sample output from the command:
XSR#show snmp engineID
Local SNMP engineID: 800015F8030001F423E691
IP-addr
10.10.1.48

show snmp group

This command displays the names of groups on the XSR with their security model and views.
Syntax
show snmp group
Mode
Privileged EXEC: XSR#
Sample Output
The following sample output displays one group, nm, which was configured with a few views
attached to it:
XSR#show snmp group
grouname: nm
readview: tcpView
notifyview: <no notifyview specified>
grouname: nm
readview: v1default
notifyview: <no notifyview specified>
0 Silent drops
0 Proxy drops
Port
162
Rewrite Engine ID
800009041234
security model: v1
wirteview: tcpView
security model: v2c
wirteview: <no writeview specified>
SNMP Show Commands
XSR CLI Reference Guide 1-35