Display Link-Aggregation Summary - 3Com Switch 4500 Family Manual

Table 1-1 Description on the fields of the display link-aggregation interface command
Selected AggID
Local
Port-Priority
Oper key
Flag
Remote
System ID
Port number
Received LACP Packets: 0 packet(s), Illegal: 0
packet(s)
Sent LACP Packets: 0 packet(s)

display link-aggregation summary

Syntax
display link-aggregation summary
View
Any view
Parameters
None
Description
Use the display link-aggregation summary command to display summary information of all
aggregation groups.
Note that as ports in a manual link aggregation groups do not acquire the information about their peers
automatically, so the entries in the information about the peer ports displayed are all 0 instead of the
actual values.
Examples
# Display summary information of all aggregation groups.
<Sysname> display link-aggregation summary
Aggregation Group Type:D -- Dynamic, S -- Static , M -- Manual
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor ID: 0x8000, 000f-e20f-5104
AL AL Partner ID
ID Type
Field
Select Unselect Share Master
Ports
ID of the aggregation group to which the
specified port belongs
Information about the local end
Port priority
Operation key
Protocol status flag
Information about the remote end
Remote device ID
Port number
Statistics about received, invalid, and sent LACP
packets
Ports Type Port
1-2
Description