Adding A Statically Configured Address To A Switch Database; Finding A Mac Address - 3Com SuperStack II Manual

110 C 4: W
HAPTER ORKING
Adding a Statically
Configured Address
to a Switch Database
Finding a MAC
Address
W C L
ITH THE OMMAND INE
You can add a statically configured address to a switch database using
the command on the Address menu.
add
To add an address to a port:
1 At the Top-level menu, enter:
bridge port address add
The following prompt is displayed:
Select bridge port(1-12):
2 Enter the number of the port that you wish to add an address to.
The following prompt is displayed:
Enter the address to be added:
3 Enter the address, which must be entered in the form of hyphen
separated bytes, for example: 08-00-02-06-03-bd.
The following prompt is displayed:
Enter the VLAN ID for this address (1-4094) [1]:
4 Enter the VLAN ID for the newly assigned address.
You can find a MAC address within the address databases on all Switch
units within the stack using the
To find a port MAC address:
1 At the Top-level menu, enter:
bridge port address find
The following prompt is displayed:
Enter the address:
2 Enter the address that you wish to find. The address must be entered in
the form of hyphen separated bytes, for example: 08-00-02-06-03-bd.
The command produces a display that shows all occurrences of the
address within the stack forwarding database and indicates the unit and
port number associated with it.
I
NTERFACE
command on the Address menu.
find