Authentication Configuration - 3Com SuperStack 4 Configuration Manual

5500g-ei family
Hide thumbs Also See for SuperStack 4:
Table of Contents

Advertisement

268
C
11: 802.1
HAPTER
Centralized MAC
Address
Authentication
Configuration
Centralized MAC
Address Authentication
Overview
C
X
ONFIGURATION
5 Set the IP address of the secondary authentication/accounting RADIUS servers.
[SW5500-radius-radius1]secondary authentication 10.11.1.2
[SW5500-radius-radius1]secondary accounting 10.11.1.1
6 Set the encryption key when the system exchanges packets with the
authentication RADIUS server.
[SW5500-radius-radius1]key authentication name
7 Set the encryption key when the system exchanges packets with the accounting
RADIUS server.
[SW5500-radius-radius1]key accounting money
8 Set the timeouts and times for the system to retransmit packets to the RADIUS
server.
[SW5500-radius-radius1]timer 5
[SW5500-radius-radius1]retry 5
9 Set the interval for the system to transmit real-time accounting packets to the
RADIUS server.
[SW5500-radius-radius1]timer realtime-accounting 15
10 Configure the system to transmit the user name to the RADIUS server after
removing the domain name.
[SW5500-radius-radius1]user-name-format without-domain
[SW5500-radius-radius1]quit
11 Create the user domain 3com163.net and enters isp configuration mode.
[SW5500]domain 3com163.net
12 Specify radius1 as the RADIUS scheme for the users in the domain 3com163.net.
[SW5500-isp-3com163.net]scheme radius-scheme radius1 local
13 Set a limit of 30 users to the domain 3com163.net.
[SW5500-isp-3com163.net]access-limit enable 30
14 Enable idle cut function for the user and set the idle cut parameter in the domain
3com163.net.
[SW5500-isp-3com163.net]idle-cut enable 20 2000
15 Add a local user and sets its parameter.
[SW5500]local-user localuser
[SW5500-luser-localuser]service-type lan-access
[SW5500-luser-localuser]password simple localpass
16 Enable the 802.1x globally.
[SW5500]dot1x
Centralized MAC address authentication is a type of authentication method that
controls the user network access rights using the port and MAC address. It
requires no client software for the user and uses the user's MAC address as the

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superstack 4 5500g-ei series

Table of Contents