Default Settings - 3Com SuperStack 3 Switch 4300 Getting Started Manual

Default Settings

Table 6 shows the default settings for the Switch 4300. If you initialize
the Switch, it is returned to these defaults.
Table 6 Default Settings
Feature
Port Status
Port Speed
Duplex Mode
Flow Control
Broadcast Storm Control Enabled (default threshold 3000 packets per second)
Virtual LANs (VLANs)
Multicast Filtering
Spanning Tree Protocol
BootP
Traffic Prioritization
Switch Database
Switch 4300
Enabled
10/100 Mbps ports are auto-negotiated
All fixed 10BASE-T and 100BASE-TX ports are
auto-negotiating
Enabled in half duplex
Auto-negotiating in full duplex
All ports belong to the untagged Default VLAN
(VLAN 1) with 802.1Q learning operational
Filtering enabled until IGMP query is seen.
Enabled (Fast Start is enabled on all ports)
Enabled (default IP address is 0.0.0.0)
Two queues per port
Empty Aging period 103 seconds
Default Settings 17