GBC StreamPunch Ultra Service Manual page 311

Bottom most hole is at correct Backgage depth, but the top hole is too
far from the edge of the paper.
BG RIGHT '– ' Select 1 1, 2, 3...etc. until the holes are parallel to the
edge.
Top most hole is at correct Backgage depth, but the bottom hole is
too far from the edge of the paper.
BG LEFT '-' Select 1 1, 2, 3...etc. until the holes are parallel to the
edge.
GBC StreamPunch Ultra/Ultra MP
The bottom hole is in the correct position, but the top hole is too close to
the edge of the paper.
BG RIGHT '+' Select 1 1, 2, 3...etc. until the holes are parallel to the
edge.
The top hole is in the correct position, but the bottom hole is too close to
the edge of the paper.
BG LEFT '+' Select 1 1, 2, 3...etc. until the holes are parallel to the edge.
11-05-2018
6-37
General Procedures and Information