GBC StreamPunch Ultra Service Manual page 282

4. Do steps 5 - 12 to use TRAIL to adjust the Backgage for a Single
Punch job:
TRAIL
MID
5. Press the ENTER button when the return symbol is next to the word
TRAIL to select Trail Backgage.
6. This displays the TRAIL OFFSET screen.
TRAIL OFFSET
0.0 mm
7. Press the up arrow button or the down arrow button to change the
offset by+ 0.2mm
TRAIL OFFSET
0.2 mm
• A + offset moves the position of the punch holes away from the
trail edge of the paper (increases the Backgage depth).
• A - offset moves the position of the punch holes toward the trail
edge of the paper (decreases the Backgage depth).
• The maximum Backgage range is 16mm (max) and 1mm (min) -
distance between the trail edge and edge of the punched hole.
8. Press the ENTER button to enter the new Backgage value.
This displays the TRAIL / MID screen.
TRAIL
MID
9. Press the up arrow button to display the PREVIOUS MENU option.
PREVIOUS MENU
TRAIL
General Procedures and Information
10. Press the up or down arrow button to display the EXIT option.
EXIT
PREVIOUS MENU
11. Press the ENTER button to display the SAVE VALUES screen.
SAVE VALUE?
YES
• To select YES, press the ENTER button.
• To select NO, press the down arrow button, to move the return
symbol. Then press the ENTER button.
This displays the top level screen.
READY
SINGLE PUNCH
NOTE: The BACKGAGE feature has the option to save as it defines
the backgage for that particular die type. This means that for any die
of that type inserted into that machine, the saved backgage will apply.
If the user does not save the new backgage, the next time a die of
this type is inserted in the machine, it will revert to the default depth
for that die.
GBC StreamPunch Ultra/Ultra MP
11-05-2018
6-8
NO