Arp 1.14 Caster Replacement; Arp 1.15 Docking Bracket Replacement - GBC StreamPunch Ultra Service Manual

ARP 1.14 Caster Replacement
PARTS LIST ON PL 2.2
Use this procedure to remove and install the Caster Assembly.
Removal Procedure
WARNING
Do not perform Repair activities with the power on or electrical
power supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury.
1. Disconnect the Power Cord.
2. Carefully lift the corner of the Punch by the Caster.
3. Loosen the Jam Nut.
4. Unsccrew the Caster to remove it.
5. Place the new Caster in position and screw it in.
6. Tighten the Jam Nut.
7. Lower the Punch
8. Connect the Power Cord.
GBC StreamPunch Ultra/Ultra MP
Jam Nut
Caster
02-03-2017
4-15
ARP 1.15 Docking Bracket Replacement
PARTS LIST ON PL 1.2
Use this procedure to remove and install the Docking Bracket Assembly.
Removal Procedure
WARNING
Do not perform Repair activities with the power on or electrical
power supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury.
1. Disconnect the Power Cord.
2. Disconnect the Communication cable.
3. Do GP 6.3 Undock the Punch to separate the Punch from the
upstream and downstream devices.
(Cont.)
Adjustments/Repairs