GBC StreamPunch Ultra Service Manual page 8

Important safeguards
♦ Use StreamPunch Ultra/Ultra MP only for its intended purpose of
punching paper and covers according to the indicated specifications.
CAUTION: THE PRINTER ON/OFF SWITCH DOES NOT CUT
OFF POWER FROM THE PUNCH.
♦ The Punch must be connected to a supply voltage corresponding to
the electrical rating of the machine operation instructions (also listed
on the serial number label).
♦ The grounding plug is a safety feature and will only fit into the proper
grounding-type power outlet. If you are unable to insert the plug into
an outlet, contact a qualified electrician to have a suitable outlet
installed.
♦ Do not alter the plug on the end of the cordset (if provided) of the
Punch. It is provided for your safety.
♦ Unplug the Punch before moving the machine or whenever the
machine is not in use for an extended period of time.
♦ Do not operate the Punch if the machine has a damaged power
supply cord or plug. Do not operate the machine after any
malfunction. Do not operate the machine in case of liquid spills, or if
the machine has been damaged in any other way.
♦ Do not overload electrical outlets beyond their capacity. To do so
may result in fire or electrical shock.
Do not open any panels other than those indicated by this Manual.
• Pay particular attention to the WARNINGS and CAUTIONS listed in
the Operator Manual and Service Manual.
Service Manual
Acronyms
Acronyms are used in the parts list to provide information in a limited
amount of space. The following table lists the abbreviations used in this
manual:
Acronym Meaning
CBL Cable
DRV Motor Driver (Stepper Board)
F Fuse
FAN Fan
GND Ground
M Motor
P Plug
J Connector
PSU Power Supply
S Sensor
SW Switch
SOL Solenoid
UI User Interface
11-05-2018
viii
GBC StreamPunch Ultra/Ultra MP