Gp 6.2.9 Skew Offsets Adjustment - GBC StreamPunch Ultra Service Manual

GP 6.2.9 SKEW OFFSETS Adjustment
Do the following to setup the skew offsets to straighten and offset punch
depth.
Do the following to setup the skew offsets.
1. At the top level screen,
READY
SINGLE PUNCH
Press and hold both the Up Arrow button and the Down Arrow button
for 5 seconds.
Then while still holding down the Up Arrow button and the Down
Arrow button, press the Enter button.
The Service User Interface screen will appear.
PAPER SIZE
MAX BYPASS
2. Press the down arrow so the return symbol is next to the words
SKEW OFFSETS.
FUNCTION TESTS
SKEW OFFSETS
3. Press the ENTER button when the return symbol is next to the words
SKEW OFFSETS to display the SKEW OFFSETS screen.
BG LEFT
BG RIGHT
4. Press the down arrow to scroll through the Skew Offset options.
• BG LEFT
GBC StreamPunch Ultra/Ultra MP
*
*
*
11-05-2018
• BG RIGHT
• BG DP L LEFT
(for LTR Short Edge and A4 Short edge Double punch)
• BG DP L RIGHT
(for LTR Short Edge and A4 Short edge Double punch)
• BG DP XL LEFT
(for 11 x 17 Short Edge and A3 Short Edge Double punch)
• BG DP XL RIGHT
(for 11 x 17 Short Edge and A3 Short Edge Double punch)
5. Scroll until the return symbol is next to the desired Skew Offset,
BG RIGHT
BG DP L LEFT
• Press the ENTER key to display the Skew Offset screen for that
setting.
BG DP L LEFT
0
• Press the up arrow button or the down arrow button to change the
offset by + 1 increment.
BG DP L LEFT
-1
• When you reach the desired Skew Offset, press the ENTER
button to return to the previous Skew Offset screen.
BG RIGHT
BG DP L LEFT
• If you want to change another Skew Offset, press the down arrow
to scroll through the Skew Offset options, then repeat the this
entire step for the other Skew Offset option.
6. From any Skew Offset screen, you can scroll up or down through the
entire list of Skew Offset options.
General Procedures and Information
6-35
*
*