Arp 3.2 Chip Tray Home Switch Replacement - GBC StreamPunch Ultra Service Manual

ARP 3.2 Chip Tray Home Switch Replacement

PARTS LIST ON PL 2.5
Use this procedure to remove and install the Chip Tray Home Switch
(SW2).
1. Open the Front Door.
Adjustments/Repairs
2. Remove the Chip Tray.
3. Disconnect Cable 7715485 at the Chip Tray Home Switch.
4. Remove the Screws (2) and the old Chip Tray Home Switch Bracket.
5. Place the new Chip Tray Home Switch Bracket in position and tighten
the Screws (2).
6. Connect Cable 7715485 at the Chip Tray Home Switch.
7. Put the Chip Tray in position and push the Chip Tray Assembly in
firmly until it latches.
8. Close the Front Door.
Chip Tray
9. Connect the Power Cord.
02-03-2017
4-84
Chip Tray Home Switch
Screws (2)
GBC StreamPunch Ultra/Ultra MP
Cable