GBC StreamPunch Ultra Service Manual page 317

9. For COMM, COMPLETE is NOT displayed.
The system automatically returns to the previous screen.
LOADING
• Press the ENTER button to return the then MAIN / COMM
screen.
MAIN
COMM
10. Press the down arrow to scroll through the Firmware Upgrade options
until the return symbol is next to the Word EXIT.
FIRMWARE UPGRADE
EXIT
11. Press the ENTER button when the return symbol is next to the word
EXIT to return to the top level screen.
READY
SINGLE PUNCH
12. Remove the USB flash drive with the firmware file you uploaded.
13. Install the Cover for USB port and tighten the Screws (2).
14. Switch off the machine. Wait 10 seconds, and then switch the
machine back on again.
GBC StreamPunch Ultra/Ultra MP
*
*
*
11-05-2018 General Procedures and Information
6-43