Gp 6.16 Panel Latch Inspection - GBC StreamPunch Ultra Service Manual

GP 6.16 Panel Latch Inspection

Magnetic latches on the Entrance and Exit Idler Panels, and the Upper
Bypass Idler Assembly hold the Idler Panels in place, which in turn keep
even pressure on the idler rollers.
The latch for the Acceleration Idler Panel ensures the Acceleration Panel
remains firmly closed to keep even pressure on the Acceleration Idler
Roller.
Maintenance Schedule
Inspect every 1,000K cycles.
Entrance Idler Panel Latch, Exit Idler Panel Latch, Upper Bypass
Panel Latch Inspection
To inspect these three latches follow the procedure below:
• Entrance Idler Panel Latch
• Exit Idler Panel Latch
• Upper Bypass Panel Latch
1. Open the Front door.
2. When the idler panel is latched, the idler panel spacers ((2) spacers
for each Idler assembly) should contact the drive panels completely.
There should not be any movement in the idler assembly (toward or
away from the drive panel).
General Procedures and Information
3. When the idler panel is opened and closed, you should be able to see
the Idler springs extend, which will ensure proper idler roller pressure.
4. To adjust the Idler Panel magnetic Latches, do ADJ 1.7 Idler Panel
Magnetic Latches Adjustment.
GBC StreamPunch Ultra/Ultra MP
11-05-2018
6-56