Rtp 3.2; Check Sensors S6 To S21 - GBC StreamPunch Ultra Service Manual

RTP 3.2

Check Sensors S6 to S21

Use this RTP to check Sensors S6 to S21.
Sensors S6, S7, S8, S9, S10
To Access Sensors S6, S7, S8, S9, S10
• Undock StreamPunch Ultra/Ultra MP- This step is optional- if possible reach in through the jam access opening without undocking the punch.
• Open Front Door.
• Open Lower Exit Panel Assembly.
S10
GBC StreamPunch Ultra/Ultra MP
S9
S6
S7
S8
S9
S10
Note: Sensors S6, 7, 8, 9 and 10 are on the Skew Sensor Board
S8
11-05-2018
2-36
S7 S6
RTPS