Clear Cover Procedure - GBC StreamPunch Ultra Service Manual

GP 6.1.3

CLEAR COVER Procedure

1. From the top level screen, press either the up arrow button or the
down arrow button.
READY
SINGLE PUNCH
This displays the SETTINGS - INFORMATION screen
SETTINGS
INFORMATION
2. Press the ENTER button when the return symbol is next to the word
SETTINGS. To display the display the ALIGNMENT / CLEAR COVER
screen.
ALIGNMENT
CLEAR COVER
3. Press the ENTER button when the return symbol is next to the word
CLEAR OFFSET to display the CLEAR OFFSET screen.
CLR BACKAGE
CLR ALIGNMENT
• For CLR BACKGAGE go to step 5.
• For CLR ALIGNMENT go to step 8 (See page Error! Bookmark
not defined.).
GBC StreamPunch Ultra/Ultra MP
4. To set the BACKGAGE value for Clear Cover media, press the
ENTER button when the return symbol is next to the words CLR
BACKGAGE,
CLR BACKAGE
CLR ALIGNMENT
This displays the CLR BACKGAGE screen. Enter the desired value,
the Offsets are in +/-0.2mm increments
CLR BACKGAGE
0.0 mm
5. Press the ENTER button to display the CLR BACKGAGE / CLR
ALIGNMENT screen.
CLR BACKGAGE
CLR ALIGNMENT
6. Press the up or down arrow button to display the EXIT option.
EXIT
PREVIOUS MENU
• Press the ENTER button to return to the top level screen
READY
SINGLE PUNCH
(Cont.)
11-05-2018
6-11
General Procedures and Information