GBC StreamPunch Ultra Service Manual page 29

ERROR E451 DIE ENCRYPTION ERROR
This means that the die is not a GBC certified die or the dieset was not
read properly.
1. Open the Front Door.
2. Remove the Die Set (see StreamPunch Ultra/Ultra MP/Ultra MP User
Manual).
3. Check that the Die Set is the correct Die Set for the Punch.
The Die Set is the correct die Set for the Punch.
Yes- Go to Step 4 No- Replace the Die Set
4. Slowly re-insert the die set into the machine and close the front door.
This clears the fault.
Yes- Resume normal operation
No- Replace the Die Set and escalate to next level.
GBC StreamPunch Ultra/Ultra MP
ERROR E452 INCOMPATIBLE DIE
This means the die is not a certified Ricoh die.
1. Open the Front Door.
2. Remove the Die Set (see StreamPunch Ultra/Ultra MP User Manual).
3. Check that the Die Set is the correct Die Set for the Punch.
The Die Set is the correct die Set for the Punch.
Yes- Go to Step 4
4. Slowly re-insert the die set into the machine and close the front door.
This clears the fault.
Yes- Resume normal operation
No- Replace the Die Set and escalate to next level.
11-05-2018
2-12
No- Replace the Die Set
RTPS