Arp 3.16.1 Steering Idler Roller Bearing Replacement - GBC StreamPunch Ultra Service Manual

ARP 3.16.1 Steering Idler Roller Bearing Replacement

PARTS LIST ON PL 4.4
Use this procedure to remove and install a Steering Idler Roller Double
"D" Flange Bearing.
WARNING
Do not perform Repair activities with the power on or electrical
power supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury.
1. Do ARP 3.16 Steering Idler Roller Replacement to remove the
Steering Idler Roller.
2. Remove the Steering Idler Roller Bearing (2) from the ends of Shaft
on the Steering Idler Roller Assembly.
GBC StreamPunch Ultra/Ultra MP
Steering Idler Roller Assembly
Steering Idler Roller Bearing
3. Place the new Steering Idler Roller Bearing (2) on to the ends of
Shaft on the Steering Idler Roller Assembly.
4. Do ARP 3.16 Steering Idler Roller Replacement to install the Steering
Idler Roller.
02-03-2017
4-111
Adjustments/Repairs