Arp 1.3 Front Door Bottom Hinge Bracket Replacement; Arp 1.4 Front Door Top Hinge Bracket Replacement - GBC StreamPunch Ultra Service Manual

ARP 1.3 Front Door Bottom Hinge Bracket Replacement
Use this procedure to remove and install the Front Door Bottom Hinge
Bracket.
1. Press the Power Switch to the off position.
2. Disconnect the Power Cord.
3. Do ARP 1.2 Front Door Replacement to remove the Front Door.
4. Remove the Screws (2) and the Front Door Bottom Hinge Bracket
5. Place the new Front Door Bottom Hinge Bracket in position and
tighten the Screws (2).
6. Do ARP 1.2 Front Door Replacement to install the Front Door.
7. Connect the Power Cord.
GBC StreamPunch Ultra/Ultra MP
Front Door
Bottom Hinge
Bracket
02-03-2017

ARP 1.4 Front Door Top Hinge Bracket Replacement

Use this procedure to remove and install the Front Door Top Hinge
Bracket.
1. Press the Power Switch to the off position.
2. Disconnect the Power Cord.
3. Do ARP 1.2 Front Door Replacement to remove the Front Door.
4. Remove the Screws (3) and the Front Door Top Hinge Bracket. One
is on the down stream side panel, and the other 2 are above the
bypass inside the machine.
5. Place the new Front Door Top Hinge Bracket in position and tighten
the Screws (3).
6. Do ARP 1.2 Front Door Replacement to install the Front Door.
7. Connect the Power Cord.
4-5
Adjustments/Repairs