Die Cycles Procedure - GBC StreamPunch Ultra Service Manual

GP 6.1.9

DIE CYCLES Procedure

The Die Cycles feature shows the number of cycles for the die set that is
currently installed in the machine.
1. From the top level screen,
READY
SINGLE PUNCH
2. Press either the up arrow button or the down arrow button to display
the SETTINGS/ INFORMATION screen.
SETTINGS
INFORMATION
3. Press the down arrow button to move the return symbol down until it
is next to the word Information,
SETTINGS
INFORMATION
4. Press the ENTER button to display the DIE TYPE – DIE CYCLES
screen.
DIE TYPE
DIE CYCLES
5. Press the ENTER button when the return symbol is next to the words
DIE CYCLES to display the DIE CYCLES screen.
DIE CYCLES
23,495
6. Press the ENTER button to display the DIE TYPE – DIE CYCLES
screen.
DIE TYPE
DIE CYCLES
GBC StreamPunch Ultra/Ultra MP
7. Press the up or down arrow button to display the EXIT option.
EXIT
PREVIOUS MENU
8. Press the ENTER button to return to the top level screen
READY
SINGLE PUNCH
11-05-2018
6-17
General Procedures and Information