Arp 3.21 Die Lock Handle Replacement - GBC StreamPunch Ultra Service Manual

ARP 3.21 Die Lock Handle Replacement
PARTS LIST ON PL 4.1
Use this procedure to remove and install the Die Stop Handle.
1. Disconnect the Power Cord.
2. Open the Front Door.
Die Lock Handle
3. Remove the Phillips Screw and the Die Stop Handle.
4. Place the new Die Stop Handle in position and tighten the Phillips
Screw.
5. Close the front Door.
6. Connect the Power Cord.
GBC StreamPunch Ultra/Ultra MP
02-03-2017 Adjustments/Repairs
4-115