Arp 3.6 Punch Motor Belt Replacement (Timing Belt) - GBC StreamPunch Ultra Service Manual

ARP 3.6 Punch Motor Belt Replacement (Timing Belt)

PARTS LIST ON PL 4.1
Use this procedure to remove and install the Punch Motor Belt.
•
(Belt, Timing, Punch Pulley, 115V)
•
Belt, Timing, Punch Pulley, 230V
WARNING
Do not perform Repair activities with the power on or electrical
power supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury.
1. Disconnect the Power Cord.
2. Do ARP 1.6 to remove the Rear Cover.
3. There is no need to uninstall the punch module, however for ease of
operation it is a good idea to uninstall it using ARP 3.1
4. Remove the JE-10 E-Ring.
5. Remove the Nylon Washer.
6. Remove the Ball Bearing.
7. Remove the Screws (2) and the Bearing Bracket.
GBC StreamPunch Ultra/Ultra MP
8. Remove the old Belt.
9. Place the new Belt around the Timing Pulley on the Punch Motor and
the Clutch pulley.
02-03-2017
4-87
Clutch Pulley
Belt
Adjustments/Repairs