GBC StreamPunch Ultra Service Manual page 160

7. Remove the M4 Screws (5) from the Front Frame. The screws to be
removed are marked with a downward arrow ( ).
8. Go to the rear of the Punch.
9. Disconnect the Connectors (2) for Sensors S6-S10 and S11-S15.
(Cont.)
Adjustments/Repairs
10. Disconnect the Connector for Sensor S28.
11. Disconnect the Connector for Solenoid SOL2.
12. Disconnect the Connector for the M5 Motor Driver.
(Cont.)
GBC StreamPunch Ultra/Ultra MP
02-03-2017
4-80