Gp 6.8 External Cleaning; Gp 6.9 Internal Cleaning - GBC StreamPunch Ultra Service Manual

GP 6.8 External Cleaning
Do the following to clean the exterior of the StreamPunch Ultra/Ultra MP.
1. Clean the exterior covers with a soft cloth moistened with mild
detergent and warm water.
Do not use chemical cleaners or solvents as these may have a harmful
effect. Use detergent sparingly to avoid contact with electrical
components.
Warning: Make sure you disconnect the StreamPunch Ultra/Ultra MP
from its power source before cleaning. Failure to observe this warning
could result in death or serious Injury.
GBC StreamPunch Ultra/Ultra MP
GP 6.9 Internal Cleaning
Do the following to clean the interior of the StreamPunch Ultra/Ultra MP.
1. Occasionally remove the covers and remove paper dust and chips.
Paper dust can accumulate throughout the punch including around
the motor and other electrical components.
Use a vacuum cleaner if possible. A small paintbrush can also be
used but extreme care should be used around electrical components.
2. Clean non-electrical components with alcohol, an approved cleaner,
or a soft cloth moistened with mild detergent and warm water.
3. Clean the Rollers with alcohol.
Warning: Make sure you disconnect the StreamPunch Ultra/Ultra MP
from its power source before cleaning. Failure to observe this warning
could result in death or serious Injury.
11-05-2018
6-49
General Procedures and Information