8.4. Sheet guides installation
8.4.1
Entrance side guides
Install the entrance guide provided in the Installation kit with the supplied
M4-8mm long round tipped screws (2 Nos.).
If installing the StreamPunch Ultra/MP directly downstream to a printer
that utilizes a decurl unit, the Entrance guides need not be installed.
8.4.2
Exit side guides
Depending on the downstream device choose the appropriate Exit guide
from the Installation kit. Install the appropriate Exit guide with the
supplied M4-8mm long round tipped screws (2 Nos.)
Straight exit guide
SR5050, SR5060, SR4080,
SR4110, SR5070 & SR5080
Installation Instructions
Angled exit guide
SK50** series
02-03-2017
8-4
GBC StreamPunch Ultra/Ultra MP