Tools; Standard Tools (Metric); Other Recommended Tools And Supplies; Lubrication - GBC StreamPunch Ultra Service Manual

Tools

Tools recommended for service of the GBC StreamPunch Ultra/Ultra MP:

Standard Tools (metric)

• 7mm Nut Driver
• 5.5mm Nut Driver
• 7mm Open End Wrench
• 5.5mm Open End Wrench
• Needle Nose Pliers
• Phillips Screwdriver
• Flathead Screwdriver
• Wire Cutters
• Metric Allen Key Set (1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm)

Other Recommended Tools and Supplies

• 0.25mm, 1mm, and 3mm Shim Gauges
• 0 to 2 kgf Tension meter (also called Spring gage)
GBC StreamPunch Ultra/Ultra MP

Lubrication

For General lubrication please see the following sections
• GP 6.7.3, Die Set Lubrication
• GP 6.20, Punch Drive Cam Lubrication
11-05-2018
6-77
General Procedures and Information