GBC StreamPunch Ultra Service Manual page 281

GP 6.1.1 BACKGAGE SETTING Procedure
Do the following to change the Backgage (move the position of the punch
holes toward or away from the trail edge of the paper).
1. From the top level screen, press either the up arrow button or the
down arrow button.
READY
SINGLE PUNCH
This displays the SETTINGS - INFORMATION screen
SETTINGS
INFORMATION
2. Press the ENTER button when the return symbol is next to the word
SETTINGS. To display the display the BACKGAGE / ALIGNMENT
screen.
BACKGAGE
ALIGNMENT
3. Press the ENTER button when the return symbol is next to the word
Backgage to display the TRAIL MID screen.
TRAIL
MID
• TRAIL refers to the trail edge punch (Single Punch) and MID
refers to the punch happening MID sheet.
GBC StreamPunch Ultra/Ultra MP
11-05-2018
6-7
General Procedures and Information