Arp 1.5 Panel Open Magnet Replacement - GBC StreamPunch Ultra Service Manual

ARP 1.5 Panel Open Magnet Replacement

Use this procedure to remove and install a Panel Open Magnet (PL 2.2).
1. Press the Power Switch to the off position.
2. Disconnect the Power Cord.
3. Open the Front Door.
4. Remove the Screws (2) and the Panel Open Magnet.
Screw (2)
Panel Open
Magnet
5. Place the Panel Open Bracket in position and tighten the Screws (2).
6. Close the Front Door.
7. Connect the Power Cord.
GBC StreamPunch Ultra/Ultra MP
Adjustments/Repairs 02-03-2017
4-6