Arp 1.12 Lcd Display Replacement - GBC StreamPunch Ultra Service Manual

ARP 1.12 LCD Display Replacement
PARTS LIST ON PL 1.2
Use this procedure to remove and install the LCD Display.
Removal Procedure
WARNING
Do not perform Repair activities with the power on or electrical
power supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury.
1. Disconnect the Power Cord.
2. Open the Front Door.
3. Locate the LCD display under the top cover and disconnect the
cables from the LCD Display.
4. From the bottom side of the Top Cover, remove the Screws (3)
holding the LCD Display to the Top Cover.
5. Remove the LCD Display.
GBC StreamPunch Ultra/Ultra MP
Installation Procedure
1. Place the new LCD Display Panel in position.
2. Tighten the Screws (3) holding the LCD Display to the Top Cover.
3. Connect the Cable (2) to the LCD Display Panel.
4. Close the Front Door.
5. Connect the Power Cord.
Cable
Cable
Screws
02-03-2017
4-13
Adjustments/Repairs