GBC StreamPunch Ultra Service Manual page 179

8. Remove Align Home Sensor Bracket sub assembly by removing the
screws (2) and its cable.
9. Remove Left and Right Steering Stepper Motors along with their
corresponding cables, by removing the Screws (8).
GBC StreamPunch Ultra/Ultra MP
Align Home Sensor
Bracket
Installation Procedure
1. Install the parts that were removed in the new Alignment Carriage
Sub assembly.
Installation tip:
Look at the images for selecting the proper cable for the motors:
7715529
02-03-2017
4-99
Adjustments/Repairs