Installation Instructions; Recommendations And Pre-Requisites; Unpacking; Configurations - GBC StreamPunch Ultra Service Manual

8.1. Recommendations and Pre-requisites

•
You will need the installation kit provided with the StreamPunch
Ultra/MP unit, which can be found in the main carton.
•
Using a jogging unit on the finisher will improve the stack quality for
binding purposes.

8.2. Unpacking

•
Inspect the outside of the package for shipping damage. If there is
evidence of shipping damage, contact the shipping
immediately.
•
Remove the punch from its shipping carton. Three people are
recommended, one lifting at the casters while two lift at the top cover.
DO NOT lift using the front door panel.
•
Retain the smaller accessory box; it contains parts required for
correct installation of the StreamPunch Ultra/MP.
•
Inspect for any concealed damage to the unit. If there is evidence of
concealed shipping damage, contact the shipping carrier immediately.
•
Remove all shipping tape from doors and levers.

8.3. Configurations

StreamPunch Ultra can be installed with the below printer/finisher
configurations:
Printer Downstream
device
Pro C7110x SR5060
Pro 8100x SR5050
Pro C9100/9110 SK50** series
GBC StreamPunch Ultra/Ultra MP
carrier
StreamPunch Ultra MP can be installed with the below printer/finisher
configurations:
Comm.
Cable
7715727
7715727
Communication cable 7718535
7715727
02-03-2017
Communication cable 7715727
Printer Downstream
device
MP 6503
MP 7503
MP 9003
MP C6503
MP C8003
Pro 5200/5210
8-3
Comm.
Cable
7718535
SR4080 7718535
7718535
7718535
SR4110
7718535
SR5070 & 7715727
SR5080

Installation Instructions