Arp 2.30 Solenoid Replacement; Arp 2.30.1 Diverter Solenoid Replacement - GBC StreamPunch Ultra Service Manual

ARP 2.30 Solenoid Replacement
PARTS LIST ON PL 2.8 PL 3.2, PL 3.3, PL 3.4
Use this procedure to remove and install the Solenoids in these
assemblies:
Solenoid
Diverter Subassembly
Punch Clutch
Entrance Idler Solenoid, Middle
Entrance Idler Solenoid, Bottom
Acceleration Roller Idler Solenoid
Exit Idler Solenoid, Bottom
Exit Idler Solenoid, Middle
Exit Idler Solenoid, Top
WARNING
Do not perform Repair activities with the power on or electrical
power supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury.
GBC StreamPunch Ultra/Ultra MP
Solenoid # ARP #
SOL 1 ARP 2.30.1
SOL 2 ARP 3.7
SOL 3 ARP 2.30.2
SOL 4 ARP 2.30.2
SOL 5 ARP 2.30.3
SOL 6 ARP 2.30.4
SOL 7 ARP 2.30.4
SOL 8 ARP 2.30.4

ARP 2.30.1 Diverter Solenoid Replacement

PARTS LIST ON PL 2.3
Use this procedure to remove and install the Diverter Solenoid Assembly
(SOL 1).
Do not perform Repair activities with the power on or electrical
power supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury.
Removal Procedure
1. Disconnect the Power Cord.
2. Do ARP 1.6 to remove the Rear Cover.
3. Do ARP 1.16 to remove the Exhaust Fan Bracket.
4. Remove the M4 (2) screws from the Diverter Shaft.
5. Disconnect the inline Connector for the Diverter Solenoid sub-
assembly.
02-03-2017
4-75
WARNING
Adjustments/Repairs