Cabinet; Arp 1.1 Top Cover Replacement - GBC StreamPunch Ultra Service Manual

REPLACEMENTS

1. Cabinet

ARP 1.1 Top Cover Replacement

PARTS LIST ON PL 1.2
Use this procedure to remove and install the Top Cover Assembly.
Removal Procedure
WARNING
Do not perform Repair activities with the power on or electrical
power supplied to the machine. Some machine components contain
dangerous electrical voltages that can result in electrical shock and
possible serious injury.
1. Disconnect the Power Cord.
2. Open the Front Door.
3. Do ARP 1.6 to remove the Rear Cover.
4. Remove the Phillips Head Screws (4) from the Top Cover Tabs. (2
screws from front side and 2 screws from rear side)
GBC StreamPunch Ultra/Ultra MP
5. Disconnect the LCD Panel Connector and release the LCD Cable
from wire saddles.
6. Remove the Top Cover.
Installation Procedure
Use this procedure to install the Top Cover Assembly.
1. Place the Top Cover in position so the Tabs overlap the front and rear
frame.
2. Install and tighten the Phillips Head Screws (4) through the Tabs.
3. Connect the LCD Panel Connector and place the LCD Cable in the
wire saddles
4. Close the Front Door.
5. Do ARP 1.6 to install the Rear Cover.
6. Connect the Power Cord.
02-03-2017
4-3
Adjustments/Repairs