Gp 6.1.5 Units Procedure - GBC StreamPunch Ultra Service Manual

GP 6.1.5 UNITS Procedure
Do the following to select the Language mode.
1. From the top level screen, press either the up arrow button or the
down arrow button.
READY
SINGLE PUNCH
This displays the SETTINGS - INFORMATION screen
SETTINGS
INFORMATION
2. Press the ENTER button when the return symbol is next to the word
SETTINGS to display the display the BACKGAGE/ ALIGNMENT
screen.
BACKGAGE
ALIGNMENT
3. Press the down arrow button so the return symbol is next to the word
Units.
LANGUAGE
UNITS
4. Press the ENTER button when the return symbol is next to the word
UNITS to display the UNITS screen.
UNITS
MM
5. Press either the up arrow button or the down arrow button to change
units from mm to inch or vice versa.
UNITS
INCH
General Procedures and Information
6. Press the ENTER button to input the new language value, and
display the Language / Units screen.
CLEAR OFFSET
LANGUAGE
7. Press the up or down arrow button to display the EXIT option.
EXIT
PREVIOUS MENU
8. Press the ENTER button to return to the top level screen
READY
SINGLE PUNCH
GBC StreamPunch Ultra/Ultra MP
11-05-2018
6-14